|
Achieving 54mbps
I have an Asus wl-138g v2 wireless card on my desktop PC (Vista HP) and an
Atheros card on my laptop. I am connecting to my router and wlan through a
Linksys WAP54G AP.
My laptop reports a 54mbps connection all over the house. However, I always
get only 11mbps with the Asus card even though the signal strength is
excellent (88%). I have set the AP to wireless-G only as suggested in other...
|
4 |
6/6/2007 4:29:44 PM |
|
|
problem with WlanSetProfileEapXmlUserData
Hi folks, I've been trying to set the settings of my profile using the
function WlanSetProfileEapXmlUserData. The function definition can be
found http://msdn2.microsoft.com/en-us/library/ms706802.aspx
I dont know how the fifth parameter should be sent. I'm using the
definition that I found at
http://msdn2.microsoft.com/en-us/library/bb204662.aspx but I always
receive an error 1206 wic...
|
1 |
6/6/2007 3:55:15 PM |
|
|
want to check ur knowledge ? microsoft will give u more out of it
hey buddy want cool gifts from microsoft check this.
http://justpratik.blogspot.com
sure not fake.
check it
...
|
1 |
6/6/2007 9:52:29 AM |
|
|
Is this correct XP Home Q Password Won't Save
Does this screenshot look normal for XP Home, or am I missing the save
password tickbox ??
I also found this but it didn't help.
support.microsoft.com/kb/885180/en-us
www3.telus.net/M-Design/Cap-098989.jpg...
|
2 |
6/5/2007 4:52:48 PM |
|
|
Can Ping Web Client but Can't connect?
I've setup a wireless router in my office and I'm wondering if anyone on
this group might have an idea what else I need to look for.
Have a call pilot 100 system setup in my office, when I connect directly to
the call pilot with my laptop and set a static IP for the laptop I'm able to
connect to the call pilot web interface and make changes. However when I
connect the call pilot system to ...
|
3 |
6/5/2007 4:35:21 PM |
|
|
Wireless suddenly extrememly slow except right by router
We have a Linksys wireless router in the office and a couple of
wireless laptops and an Xbox using the wireless connection. These
have all always connected extremely fast two or three rooms away, or
even outside, until a couple of weeks ago when the modem (DSL) got
reset when a storm came through. We set everything back up on the
modem and the router, and could connect from two rooms away, ...
|
3 |
6/5/2007 2:08:03 PM |
|
|
ICS and DSL/WiFi Router Integration
Can't seem to find a configuration combination to allow WiFi router connected
laptop to recognize ICS-connected resources - that is, I want to use a
printer on one of my ICS-networked pcs from a wifi-router (DSL) connected
laptop. Anyone got a match?...
In more detail:
ICS network, configured in a logical and physical bus topology, connected
via separate NIC to a Westell 327W router...
|
9 |
6/5/2007 1:42:19 PM |
|
|
Export Profiles in WZC
Is there a way in Windows XP SP2 to export the WZC wireless profiles? We
have about 20 access points secured with WEP passwords and it would be
helpful to setup all of the profiles on one machine and be able to export
them and then import them into another machine either manually or by login
script.
Thanks,
Stan Cooper
...
|
2 |
6/5/2007 1:28:34 PM |
|
|
Sleep Mode with Vista Ultimate
I bought a new computer with an Asus motherboard that has a wireless card
built in. Every time it goes to sleep mode, I lose wireless connectivity. I
have to disconnect the card and re-enable it to get it working. Has anyone
else experienced this ?
...
|
5 |
6/5/2007 9:03:54 AM |
|
|
Cannot access workgroup computers
I have set up a wireless network between a desktopn and notebook. Although
the wirless network connection is created, and both devices are in the same
workgroup, I cannot see or access any resources across the connection.
Have tried enabling Netbios over TCP/IP, enabled guest accounts, but no joy.
Below is info on both devices, and the IPCONFIG /ALL output
Desktop - Dell GX270, XP Pr...
|
11 |
6/5/2007 6:40:01 AM |
|
|
Sharing a printer
I have 3 computers running XP and 1 Apple computer connecting to a wireless
router. All have internet access, but I've never been able to figure out how
to get them to share a printer. Generally I'm not an idiot, but when it come
to this, I'm clueless. Can anyone help? If it makes any difference, the
printer I'm trying to share can also be directly connected to the router....
|
8 |
6/4/2007 6:00:59 PM |
|
|
File and printer sharing
Hi Everyone,
I have been trying to setup my home network to share files and share a
Lexmark All In One printer over the past day (I'm using Windows XP). I am
successfully sharing the Internet connection. I set that up with no problems
at the beginning of the year. However, I didn't set up the sharing at the
time.
I have a Belkin wireless G router. My cable modem is connected to my route...
|
3 |
6/4/2007 2:30:44 PM |
|
|
wireless keeps disconnection!!!
hi
i have sony vaio. i reset my laptop using the recovery disk. after which i m
having problem connecting to my laptop. previously i posted a question and
with help i got my wireless working. but then now when it does work it keeps
disconnecting after 10 min. i have dowloaded drives for my wireless adaptor
and installed it but still no use. anyone who can furture help me in this,
thxs
...
|
9 |
6/3/2007 8:32:03 PM |
|
|
cant use wireless connection
hi,
i have sony vio running on window xp. i had some problem so used my recovery
disk to put my lap top back to factory settings. after doing tht i cant
connect to my wireless connection. at the moment i can connect to internet
through network cable.
i tried using static ip address but tht doesnt work. i tried ipconfig on
command prombt and its saying media disconnected. when i was tri...
|
8 |
6/2/2007 8:57:00 AM |
|
|
Wireless: Connected and Strong Signal, But No Internet
When I connect to the internet via "local area connection" NVIDIA nForce
Networking Controller, everything works fine, I connect and IE7 runs fine,
as do all programs that need to connect to the internet.
When I connect via "Wireless Network Connection" Realtek RTL8187 Wireless
802.11g 54Mbps USB 2.0 Network Adapter, may status is "connected" and my
signal strength is "Very Good", but I can...
|
2 |
6/1/2007 9:25:27 PM |
|
|
nascondere il SSID
La mia domanda può risultare magari banale..
ma se io imposto in un Access point che il SSID non venga divulgato in
broadcast come faccio poi con un pc portatile
a trovare la rete quando fa la scansione nel pannello di windows che
gestisce la mia scheda di rete wi.fi?
grazie
...
|
2 |
6/1/2007 8:41:27 PM |
|
|
RADIUS packet not properly formatted
Here is the error from both IAS servers:
Access request for user host/RO-MLR52-02.instruct.rhnet.org was discarded.
Fully-Qualified-User-Name = <undetermined>
NAS-IP-Address = 10.12.12.146
NAS-Identifier = <not present>
Called-Station-Identifier = 00-90-0B-08-5A-88:Roth
Calling-Station-Identifier = 00-13-CE-55-92-1D
Client-Friendly-Name = Meru #2
Client-IP-Address = ...
|
1 |
6/1/2007 3:44:01 PM |
|
|
4 Port Router and 6 Devices???
I have a Linksys 4 port wireless router. Currently, I have 2 PCs and 1
printer directly linked to the router via lan cables, and a notebook using a
wireless connection to the router.
Now, I am getting another notebook and a color printer. The notebook will
use wireless connection and the printer will be linked to the router via a
lan cable.
Since my Linksys router offers 4 ports, sho...
|
3 |
6/1/2007 2:38:01 PM |
|
|
Wireless signal to another structure
We have a building with various jacks throughout for computers. Shortly
after the build, a Linksys WRT54G was added for wireless.
So we have our HughesNet device plugged into the Linksys which then DHCPs
the remainder of the building.
There is a house not terribly far behind the building, approximately 200-300
feet. We would like to project wireless signal to that house from the main...
|
4 |
6/1/2007 2:28:25 PM |
|
|
Internet Connection malfunctioning
I have been using the Belkin Pre-N router for connecting to the
Internet.
My home network consists of a Desktop (wired connection to Router) and
2 notebooks connected via wireless. I used to connect to internet via
all 3 machines but lately 1 of them has stopped working. I can ping
the router successfully but have not been able to connect to the
Internet.
I have already tried doing :
1...
|
4 |
5/31/2007 6:50:16 PM |
|
|
wireless ad hoc networking using network bridging
after much havoc creating a peer to peer network from my laptop to another
laptop to access internet unsuccessfully, i discovered another method to do
this - network bridge.
what i did is that i created a wireless network connection on both of my
laptops - the host (one with the internet conn.), and the client using ad hoc.
now i bridged the two connections- the wireless one and the 100 m...
|
3 |
5/31/2007 6:48:31 PM |
|
|
Laptop Vista sometimes denied access to network
I just purchased my high school grad a HP Pavillion dv9000 laptop with an
Intel ProWireless 3945ABG network adapter. The laptop is running vista.
I have an older router, Linksys BEFW11S4 V4. I went to the wireless tab on
the router settings, selected "allow all" so I could add her mac address to
the allowed list. Then I selected restrict access.
After I restricted access, the laptop...
|
3 |
5/31/2007 2:00:37 PM |
|
|
How do I go about setting up a wireless laptop connection?
Already running one Desktop linked to a Broadband Service Provider. Would
like to connect a laptop to this so we can use it 'wireless' in the house.
Am fairly good working with what I've got and muddle through the 'Techi'
bits, but what do I need to do to set this up? Can I use a Wizard to help me
and if so, do I need to buy something first to enable me to use a wireless
set-up?
All ...
|
7 |
5/31/2007 8:32:05 AM |
|
|
WinXP, switching users messes up network connection
It seems that the wireless network connection is done on a per-user basis,
rather than systemwide. After one user connects well, if you switch users
the second user gets a flaky or unusable connection. If you log off the
first user, and log in a second, things are fine. I've tried with both
Microsoft manageing the connections, and the Intel Proset/Wireless manager.
Is there any way...
|
5 |
5/31/2007 5:39:13 AM |
|
|
should # of DHCP included wired connections?
I read your ezlan.net security instructions and one of your suggestions for
security is to "Set the DHCP to the same number of computers that you have on
your Network" I have 3 computers on my network, one wired and two wireless.
Do I set it for 3 or do I just need to count the 2 wireless connections?
Sorry, dumb question I know.
By the way, the article was great. It answered a lot ...
|
2 |
5/31/2007 2:00:30 AM |